Home
Products
Email Us
About Us
Safetech Range -- Hydraulic Lift Tables
From 500kg 'compact' to 5 tonne capacity. 240V or 415 V. Choice of controls. Can be tandem horizontal or vertical also.
Options include: 'smart lift' electronic diagnostic/warning/auto levelling system. Turntables. Rollerbeds. Lift lugs. Fork sockets. Wheeled dolly. Safety skirt, etc, etc. Tables can also be fitted into the floor or below floor.
Different deck sizes and configurations also catered for
Between 500 kg to 1500 kg capacities. Platform size 1100mm x 1270mm.
30 - 35mm height platforms. Allows easy operator access to load from both sides.
Vertical travel 800mm.
Pendant control standard. Internal power pack.
Hydraulic Scissor Lift. Lo-Lift (Column Type)
Operates by remote 3-phase power pack. Minimal entry height.
V-Lift Range -- Hydraulic Lift Tables. Budget Priced
Standard deck sizes. Choose from selection in chart. Capacities 500 kg to 2000 kg.
Zero Low scissor lifts also available. Suitable for roll on / roll off at ground level. Power pack internal. Capacities 500 kg to 1500 kg.
King Low Profile Hydraulic Lift Tables
Available as flat deck or 'U' shape. Low height only 80mm. Maximum height 830mm. 3 phase external power pack. Push button controls.
Internal or external power pack -- 3 phase. Push button control.
Capacities from 1000 Kg to 5000 Kg. Ideal for hazardous areas.
Air Tilt Table using similar airbag system to lift table. Tilts stillage or crate to 35 degrees maximum.
Deck has a pivot point at one end which allows it to be tilted using a separate hydraulic cylinder/s. In this case it is switched to allow tipping to occur only when the lift table is fully down.
It is used for loading cabinets onto the toe plate when empty. The cabinet is then filled with electrical componentry at a height to suit each individual worker. When complete, the lift is lowered and the deck tilted to upright to allow the cabinet to be removed.