Home
Products
Email Us
About Us
Combines the benefits of a standard Stock Picker with a Folding Ladder. Perfect for smaller warehouses or narrow aisles, or where aisles are heavily trafficked and a permanent ladder may take up too much room.
An extra long platform 700mm x 400mm wide, along with a front hand rail and side hand rails, gives a feeling of space and security.
Sprung castors allow the ladder to move freely when no person is standing on the ladder. Rubber feet keep the ladder firmly in place when in use.
Steel, with pull down first step to lock wheels in the 'up' position. From 2 to 10 steps high (2300mm). Choice of three top deck lengths. For long life and heavy duty. or: Aluminium, for lighter tasks. With spring loaded castors. Platform heights from 900mm to 3800mm.
Available in eight sizes from 0.9 m to 3.6 m.
With patented automatic retracting wheel system fitted with heavy duty castors.
Mezzalad makes use of the space you have paid for!
Mezzalad features a space saving mechanism which allows it to be stored flat
against the wall when not in use, and is bought to the operative position
with a simple lift and pull action.
At 600 mm, the step width accomodates comfortable access, and two hand rails
are provided for safe and easy climbing. The side rails are lengthened to
provide hand railing extending 900 mm beyond the upper floor, enabling safe
step through access to the upper floor while maintaining a hand hold.
The ladder is fastened at the upper floor level. Installation is simple with
two universal brackets allowing fastening to be made either to the floor or
wall and the ladder may be secured with bolts or screws.
To determine the correct size for the application, the measurement of floor
to floor level is all that is required.
Mezzalad is designed to comply with Australian Standard AS 1657 - 1992 for
fixed ladders and walkways.
- Makes use of the space above offices, tea rooms, etc.
- Stores out of the way when not in use with a simple lift and push action
- Two hand rails assist safe and easy climbing
- Safe step through design with a comfortable 600 mm between hand rails
- Fast installation with universal fixing bracket and simple two bolt fixing
- Supplied to match your exact required height
They cost a little more, here's why:
- It is a much safer product
- It is easier and faster to move around
- It has a safety railing system that can be adjusted to suit the job
- It is available with an automatic closing gate at the platform entry
- It meets Australian, New Zealand and European Union Standards
- and, it costs less in the long run
Stockmaster Navigator is a very safe and easy to use
mobile work platform. It features a Move, Steer and Brake control which
eliminates the need for springs, folding steps, wheel brakes and other
devices. Taking hold of the control raises the unit to the mobile position
and provides easy steering. Release of the control automatically returns
Navigator to the stationary mode where it is braked, totally stable and has
all four feet in contact with the floor at all times. All
skating and movement associated with designs that use springs or foot pedals
is eliminated, and there is no movement as the operator moves about the
platform.
One control does it all creating a much safer product.
With the Move, Steer and Brake control actuated, the operator is positioned
away from the front of the ladder to allow a normal walking step, and the
unit moves quickly with minimal effort. Navigator will move to a new
position in less than half the time of competing products. The Move, Steer
and Brake control also enables the platform to be used as a trolley. Navigator
is easier and faster to move around saving time and equipment.
Navigator is supplied with a flexible Platform Safety Rail system
which can be set up to three different configurations to provide improved
ergonomics and easy access for stock picking, maintenance tasks and many
other applications, and when fitted with the Auto-Safe Gate
the operator is protected from accidentally stepping off the front of the
platform.
Stockmaster Navigator is a modular design enabling parts replacement in the
event of accidental damage. It is manufactured from high quality materials
and built to last. With reasonable care Stockmaster Navigator will give many
years of service, and cost less in the long run.
Stockmaster Navigator meets or exceeds all the requirements of the
Australian / New Zealand standard AS/NZS 1892.1:1996 and the European
Standard EN 131: Parts 1 and 2
It will lower your cost of operation, here's how:
- It reduces handling time
- It reduces your need for labour
- It reduced down time for maintenance
- It reduces the equipment required for the job
- It reduces the risk of accident compensation claims
- and it costs less than any other product with all these benefits!
Stockmaster WinchTruk is a very safe and easy to use
stock picker. Items weighing up to 60 kg can be picked, lowered and
transported in one action. The whole stock picking process can be safely
handled by one person removing the need for a second person to pass items up
or down. Featuring a reliable manually operated winch, maintenance costs are
minimal, and there is no down time for charging of batteries. Items
placed on the lift table can be lowered and moved similar to a fork lift,
saving the time to transfer them to a trolley, and reducing the need for
trolleys.
Carrying items up or down the ladder is eliminated creating a
much safer product.
The dangerous practice of carrying large or heavy items up or down a ladder
is eliminated, significantly reducing the risk of accident. Featuring a
simple winding mechanism, the lift table can be positioned to the exact
height required to safely transfer items from shelving, and braking of the
load is automatic when the control is released. WinchTruk
substantially reduces your exposure to the high cost of lost time injuries
and compensation claims.
WinchTruk is supplied with a flexible Platform Safety Rail system
which can be set up to various configurations to provide improved ergonomics
and easy access for stock picking, and when fitted with the Auto-Safe
Gate the operator is protected from accidentally stepping off the
front of the platform.
Stockmaster WinchTruk is manufactured from high quality materials and built
to last. With reasonable care it will provide many years of service, and
cost less than any other product with all of these benefits.
Stockmaster WinchTruk meets or exceeds all the requirements of the
Australian / New Zealand standard AS/NZS 1892.1:1996, the European Standard
EN 131: Parts 1 and 2 and also accords with the provisions of the EC
Machinery Directive 98/37/EC
Stockmaster WinchTruk, in every way a SAFE CHOICE!
Whatever you need access to, we can build a suitable ladder or platform to suit.
Platforms to access trucks, buildings, mezzanine floors, or to bridge machinery or pipe installations available.
Send us your sketch or drawing with dimensions and load capacity for a quote.
- You can Tilt it
Tilt-n-Tow is a safe, portable and strong
mobile work platform. When you need a platform ladder for indoors or out, Tilt-n-Tow's
the way to go!
With a Tilt and Steer Control and two large wheels, Tilt-n-Tow
moves easily in the open position without lifting or dragging. Simply take
up the control and move it. Let the control go, and Tilt-n-Tow is
automatically in safe mode with no risk of moving as you step up to the
platform. All skating and movement associated with designs that use
springs is eliminated, and there is no movement as you work on the platform.
One control does it all creating a much safer product.
Take it from place to place on the worksite with no more lifting or
carrying. Indoors or outdoors Tow Tilt-n-Tow behind you, - over
concrete, gravel, grass or on stairs, and use your free hand for your tool
box, or whatever else you need.
Fold it, and transport it in your Ute, Wagon, or on Roof Racks and when
your not using it, simply hang it up, or store it flat against a wall.
Tilt-n-Tow is available with an automatic closing gate
at the platform entry, protecting you from accidentally stepping off the
front of the platform and making it much safer and easier to mount the
platform with tools in hand.
Tilt-n-Tow is built strong to last, with a load rating of 150
kilos, and is designed to meet the requirements of Australian / New Zealand
standard AS/NZS 1892.1:1996 & European Standard EN 131: Parts 1 and 2.
Tilt-n-Tow - the way to go - because it's simply a better
platform ladder!
The design of the Step-Thru utilises a vertical rear frame with cantilevered wheels which enables the rear of the platform to be placed directly in contact with the workplace. It is however necessary that the cantilevered wheel section is able to pass under the floor level. When descending from the workplace, a platform provided at the top step position permits the user a walk forward approach, followed by a turn around to ensure safe rearward descent. For wet weather use or other hazardous conditions, perforated platforms may be specified.
A Tilt and Steer Control and two large wheels allows the unit to move easily over most surfaces, and automatically return to the stationary mode when the control is released. With the Tilt and Steer control actuated, the operator is positioned to allow a normal walking step, and the unit is moved quickly with minimal effort.
Step-Thru is designed and manufactured to meet the requirements of Australian / New Zealand standard AS/NZS 1892.1:1996
-
They do the job the others can’t, here's why:
- Tracker moves easily over unsealed surfaces and slopes
- Tracker is easier and faster to move around needs no setting up
- Tracker has a safety railing system that adjusts to suit the job
- Tracker is available with an automatic gate at the platform entry
- Tracker meets Australian, New Zealand and European Standards
- and there’s a size to suit your job
Stockmaster Tracker is a very versatile and easy to use
mobile work platform. With two large diameter wheels it moves easily over
sealed or unsealed surfaces and slopes making it ideal for indoor or outdoor
use. Featuring a Tilt, Steer and Brake control it is fast and easy to move
around. Taking hold of the control raises the unit to the mobile position to
move
to the job. Release of the control automatically returns Tracker to the
stationary mode where it is braked and totally stable.
One control does it all creating a much safer product.
With the Tilt, Steer and Brake control actuated, the operator is positioned
away from the front of the ladder to allow a normal walking step, and the
unit moves easily to the job with minimal effort. Tracker moves to the job
in much less time than competing products and requires no set up when you
get there. Tracker is easier and faster to move around and saves
time on the job.
Tracker is supplied with a flexible Platform Safety Rail system
which can be set up to three different configurations to provide improved
ergonomics and easy access for stock picking, maintenance tasks and many
other applications, and when fitted with with the Auto-Safe Gate
the operator is protected from accidentally stepping off the front of the
platform.
Stockmaster Tracker is a modular design enabling parts replacement in the
event of accidental damage. It is manufactured from high quality materials
and built to last. With reasonable care Stockmaster Tracker will give many
years of service, and get the job done.
Stockmaster Tracker meets or exceeds all the requirements of the Australian
/ New Zealand standard AS/NZS 1892.1:1996 and the European Standard EN 131:
Parts 1 and 2
Stockmaster Tracker - not just a platform ladder
Great for accessing all those 'at height' maintenance jobs.
Comes in two heights.
Push button raise and lower. In battery and 240 V styles.