King  Materials Handling
 
  

   Home

  Products

  Email Us

   Telephone Us

  About Us

   Tips

 

 

 

 

 

 

 

 

 

 

                                                                                                                                                                                                                   
 

 

HOISTING EQUIPMENT

 

 

Chain Hoist

Electric Chain Hoist

Wide variety in single and 3 phase. Capacities from 100kg to 7.5 tonne. Single and dual speeds available.

 

 

 

 

Wire Rope Hoist

Wire Rope Hoist

Available in single and three phase. Capacities from 150 Kg to 5000 Kg.  Also available as a builder's hoist with swing arms to suit applications.

 

 

Air Hoist

 

Air Hoist

Exceptional in harsh environments, such as heat, dust, humidity and for high duty cycles. Perfect for explosive/hazardous areas. Range 1/2 tonne to 25 tonne.

 

 

 

 

Hoist

 

Beam Trolley

Suited to I-beams. Push, hand wheel or motorized available. Capacities from 250kg to 10 tonne.

 

 

 

 

Girder Clamp

 

Plate and Girder Clamps

Plate clamps for vertical and horizontal use on plate and sheet. Girder clamps are fully width-adjustable from 75mm to 570mm, and with capacities from 1 tonne to 10 tonne.

 

 

 

Slings

Chains and Slings

Available in single or multiple leg slings to any length.

 

 

Chain Fittings

Chain Fittings

 

 

Webbing Sling

Webbing Slings

Lightweight, flexible, tough and will not damage product! Available with eyes each end or endless loop style. Every width, length and capacity possible. New flexi lift system enables a sling to be made up instantly to any length -- in seconds.

 

 

Pallet Hook

Pallet Hook

Lightweight, flexible, tough and will not damage product! Available with eyes each end or endless loop style. Every width, length and capacity possible. New flexi lift system enables a sling to be made up instantly to any length -- in seconds.

 

 

 

Spreader Bar

Spreader Bar

Available in any capacity to 20 tonnes. Can be fixed or adjustable width pickup points.

 

 

Lifting Cage

Lifting Cage

Suited to cargo, pallets, bottles, people, etc. All designed to appropriate codes to suit applications.

 

 

 

Coil Hook

Coil Hook

8 tonne and 16 tonne standard capacities. Auto balancing to provide load stability. Can have a nylon hook cover for coil protection.

 

 

Drum Hoist

Drum Hoist / Rotator

2 models. 500kg and 1000 kg capacities. Chain wheel and worm drive gearbox enables tilt, and holds securely in any position. Twin duplex chain girth strap with over centre lock and safety pin for utmost security.

 

 

 

 

 

 

skyhook

skyhook

Sky Hook

Sky Hook is a very versatile lifting system which in its short form can be attached to a lathe, bench or any mobile equipment. Can be fitted with any device or sling. Can be fully customised.

In its longer form, it can be attached to a wheeled base, as shown, a bolt-down column or heavy duty wheeled trolley for those higher lifts.

Load limit is 220 kg. Minimum lift height from 650 mm to 1840 mm dependant upon model and fitting. Sky Hook can swivel 360 degrees manually.

The hand wheel raises and lowers the load using gearing which prevents the load from falling when the wheel is unattended. A latch enables the chain and swivel hook to be released manually for speedy hookups.

 

Concrete Kibble

 

Concrete Kibble

Perfect receptacle for concrete supply and placement on building sites.

Base lever allows butterfly valve to open to any size, ensuring a perfect pour every time.

Mounted Jib

Mounted Jib

 

Wall or Column Mounted Jib

Can be mounted to either a builder's pole, to enable equipment and supplies to be raised from ground level to a platform or roof.

Alternative mountings include bolting or welding to an existing steel column.

Jib can be fixed or rotatable. The load can be suspended from a single point or moved along the jib with a manual trolley.

The hoist can be either chain or wire rope, dependant upon load capacity and lift height.

Monorail

 

Monorail

Aluminium track and pipe extrusion, coupled with the manual trolley, is perfect for monorails or bridge trains.

The underslung pipe is protected from overhead dust. The trolley requires just 1 Kg of force to move 100 Kg of load.